|
|
|
Downspout Machines
|
|
Comparisons of our Downspout Machines
|
|
Breakthrough Technology in Downspout Production!
Portable or Stationary Models
State of the art design delivers where no other machine ever has!
|
World's Only
Portable Downspout Machine
Products: 2" x 3" or 3' x 3" or 3" x 4"
Dimensions: Approx. 100" x 22"
Height - 42"
Weight: Approx. 975 pounds
Speed: approx 30 feet per minute
Controls: Lever forward and reverse
Recommended Material: .019 or .024 aluminum
Material Width: 2x3 10.5"; 3x3 12.5"; 3x4 13.75"
Warranty: 2 year parts warranty.
Spools: 15" spool ,
Options:
- 220v/ 50Hz ?Runout support stand
- Hand quadra-shear
- .024 configuration
Power:
- 3/4 H.P., 110 volt, single phase,
13.2 amp motor enables it to use regular household outlet.
Drive System:
- Urethane Power Feed system
- Stainless or hard chrome forming rollers
-
-
-
-
-
|
World's Most Economical
Stationary Downspout Machine
Products: 2" x 3" or 3' x 3" or 3" x 4"
3" Round or 4" Round
Dimensions: Approx. 100" x 22"
Height - 66" including spool
Weight: Approx. 1075 pounds
Speed: approx 45' minute available
Controls: Lever forward and reverse
Recommended Material: .019 or .024 aluminum
Material Width: 2x3 10.5"; 3x3 12.5"; 3x4 13.75"
3"Round 10.5"; 4" Round 13.75"
Warranty: 2 year parts warranty.
Spools: 15" spool ,
Options:
- Electrical: 220v/ 50Hz, 3-phase, other electrical configurations
- Runout support stand
- Hand shear
- 20" reel
Power:
1 hp- 1.5 hp, 110 or 220 volt motor, other power options available
Drive System:
- Urethane Power Feed system
- Hard chromel forming rollers
Frame:
- 8" Aluminum channel
- 1" Aluminum side blocks
|
|
The Story of the Dream Downspout Machine
|
|
Years ago when we bought our first seamless gutter machine, we found out that we could buy coil quite inexpensively and have a low cost per foot for our gutters. However, when we went to buy downspout and elbows, we had to pay almost as much per foot as we had into our gutters. We knew that our suppliers didn't make much on coil, but made up for it in their profit margin in downspout and elbows. If you could only have a downspout machine, then you could save thousands of dollars by buying downspout coil instead of already formed pipe.
Well, we did that. We paid out big bucks to buy a commercial downspout machine. It works fine and makes great pipe and we were saving money and making more profit than our competitors. They could not afford to sink $60,000 to $150,000 into a downspout machine. However, we still had lots of scrap from our 10 foot lengths of pipe used out in the field. We also got tired of buying those dreadful cardboard boxes. Someone had to design a new downspout machine that was within the reach of the average gutter company. Why not us?
We talked to seamless gutter companies and asked what they wanted in a downspout machine. Here¡¯s what they came up with:
1. Portable. They wanted to make their downspout cut to length on the job site.
2. Lightweight - under 1000 pounds to haul without overloading the truck.
3. Affordable and have a quick payoff time in savings, less than three years.
4. Powered by 110 volt . It must run off regular household current.
5. Short - Maximum length would be 10 feet.
6. Durable - It should be able to run pipe consistently without a lot of adjustment.
7. Could it make Elbows? ? An elbow attachment on the end would be a dream come true.
Well, I talked to several downspout manufacturers and was told that such a machine was impossible to make. IMPOSSIBLE!? I began thinking. I contacted a friend of mine who ran a metal shop and showed him what I wanted in our downspout machine. Then, I asked if we could build a machine that would be light, portable, dependable, affordable, 110 volt, under 10¡¯ that could have an elbow attachment on the end. Like myself, he took the challenge, and we began a quest to build a dream downspout machine that would fit all these requirements.
Well, making dreams come true doesn¡¯t come easy. Our first successful downspout machine was built so many times that we lost track of how many revisions had been made. Just when we were close to our goal, we had to go back to the drawing board and redesign different aspects of the machine. We wanted the first machine to be the best machine anyone could ever make. We wanted to use as many off the shelf parts as possible to keep costs down and to make replacement parts as inexpensive as possible. Finally, we developed a machine, not just any downspout machine, but the dream machine, for it fits all the requests of our gutter companies:
1. Portable - Our machine is the ONLY portable downspout machine made.
2. Lightweight - We went under our target of 1000 pounds to 475 pounds! Using our trussed base
we were able to have a solid machine that was very lightweight without
compromising the stability of the machine!
3. Affordable - Under $30,000, with a 2 year payback in savings for an average gutter truck.
4. Powered - It is 110 volt, single phase, 12.3 amp motor powered by 20 drive rollers.
5. Short - We came in under our target length of 10 feet in length to an amazing 77? long!
6. Durable - With our integrated trussed stand included, our machine does not get out of line easily. It has been 8 years since our first machine the the first one is still out in the field working on the back of a trailer. In fact, an Amish man with no electric has it running off a gasoline engine!
7. Elbows - We have a separate elbow machine that enables you to make seamless
elbow offsets (elbows and intermediate length in one piece)!
|
|
|
|
