We bring in-plant manufacturing to the job site with a state-of-the-art roll forming machine that will run more sizes, gauges and types of material in more panel configurations with minimum adjustments and less scrap. On site fabrication eliminates shipping damage, short shipments and many sizing errors plus provides packaging and freight savings.

This means better products, less problems, and lower costs.

• Runs Steel from 22 to 30 gauge
• Runs Copper, Aluminum, Tern Coat, Stainless Steel
• Infinitely variable full cycle shear
• Snap-lock, Mechanical Seam, T Panel, ARMCO style and Bermuda Profiles
• Clip Relief and/or Stiffening can be added to any Panel Profile Striated Paneling Rollers also available
• Separate drive and form rollers eliminates most oil canning
• Hydraulic drive system and shear are electrically activated
• Optional Electronic Computer Control and Electric Sealant Pump System are available

Panformer

Length - 13' 7" (4.17m)

Width - 5' (1.5m)

Height - 4'3" (1.3m) with Over Head Rack

Weight - 3200 lbs. (1450kg)

Features

The Standing Seam Power Panel machine makes various standing seam roof pans in any width from 12" - 24", depending on the panel configuration. It will accept coil widths from 15" to 30". The machine is complete with a hydraulic drive system and cast polyurethane drive rollers, 16 H.P. electric start gasoline engine, hydraulic shear that cuts any width panel, remote limit switch, 2 sets of bead rollers, and a single remote decoiler stand. It requires a forming roller system to produce panels. Prewiring for later addition of sealant pump system is include

Panformer on Trailer

Length - 17'6" (5.3m)

Width - 7' (2.1m)

Height - 6'3" (1.905m) with reel

Weight - 4800 lbs (2200kg)

Stainless steel forming roller systems on 4 mounting bars are available as follows:

SS150 Makes 1.5" high x .5" wide mechanically seamed panel leg

SS200 Makes 2" high x .75" wide mechanically seamed panel leg

SS210A Makes 2" high x .75" wide ARMCO style panel

A hand seamer comes with each of the above systems.

Power

16 H.P. Electric Start Gas Engine

SS550 Makes 1.5" h x 7/17" wide SNAP-LOCK I snap seam panel. The most positive engagement available.

Drive

Hydraulically powered polyurethane drive rollers

SS675 Makes 1.75" high x 7/16" wide SNAP-LOCK II snap seam panel.

All of the above systems will make a U shaped pan (T Panel). Forming roller systems can be changed in about 4 hours depending upon experience.

Shear

Hydraulically powered, infinitely adjustable

Hardened Tool Steel Blads andDies, Panel Recognition Safety Photo Switch

BP Roller System on mounting bars and cut-off dies to make Horizontal Bermuda Panels. Panels can have a or 1.5" bottom edge and have 11.5" or wider exposure.

Speed

Approximately 75ft/min. Speed should be decreased 25-50% when using sealant pump depending on temperature

Available Options

TA12 12,000# capacity tandem axle trailer. Has dual reel overhead decoiler standard. No remote decoiler will be furnished.

Materials Formed

Steel - 30 - 22 gauge (painted, galvanized, aluminized)

Aluminum .019 to .040

Copper 16 oz. to 20 oz.

Stainless Steel

Terne Coat Steel

ROS10 10' of variable height runout stands

DRC01 Dual register electronic control-panel length and quantity.

SP1 Sealant Pump System

CR Clip Relief Rollers

PW Prewire controls for later installation of DRC01

SSP

Standing Seam Panel machine, requires forming rollers to product panels

$26,245

SS100

Roller system on mounting bars and cut-off dies for 1" high x 1/2 " wide mechanically seamed panel. Includes hand seamer

$4,950 **$2860

SS150

Roller system on mounting bars and cut-off dies for 1.5" high x 1/2 " wide mechanically seamed panel. Includes hand seamer

$5250 **$3155

SS200/210A

Roller system on mounting bars and cut-off dies for 2" high x 3/4 " wide mechanically seamed and 2" high and 3/4" wide ARMCO style panels.panel. Includes hand seamer. Includes clip relief rollers

$ 12,200

SS450

1 1/2" high x 1/4" wide SNAP LOCK CLIP snap seam panel

$6265 **$4175

SS550

Roller system on mounting bars and cut-off dies for 1.5" high x 1/2 " wide SNAP LOCK I snap seam panel.

$7,565

SS675

Roller system on mounting bars and cut-off dies for 1.75" high x 1/2 " wide SNAP LOCK II snap seam panel.

$9,895

FF100

1" high snap seam with slotted flange for clipless installation.

Includes Clip Relief Rollers

$7320

BP

Roller system on mounting bars and cut-off dies to make Bermuda Panels. Panels can have 1" or 1.5" bottom edge and have 11.5" or wider exposure.

$8,730

**$6,640

CR

Clip relief rollers - When added to SS150, SS550, or SS675

$170

** SS100, SS150, SS450 and BP Roller Systems all use identical left side roller sets. If you purchase or own one of these roller systems, you can add any of the other three systems at a reduced price.

OPTIONS AVAILABLE

TA12

12,000# capacity tandem axle trailer with crane eyes for lifting.

(Note: Reel rack and reels or expandable arbors sold separately)

$5250

DR1

Trailer Mount Dual Overhead Decoiler

$940

ROS10

10' of variable height runout stands

$240

HS1

Hand seamer for use with SS150 mechanically seamed panels

$180

HS2

Hand Seamer for use with SS200 mechanically seamed panels.

$365

HMT

Hot Melt System Interface

$295

SP1

Sealant pump system to automatically apply sealant to panel

$5,535

RR1

Additional bead rollers per pair

$425

RR6

Striation Roller (per pair) (4 pair required per machine)

$300

RRF

Additional frame assembly for mounting striation rollers

$300

FSD1

Single free standing decoiler

$590

DRCO1

Dual register electronic control - panel length and quanity

$3,575

DR01

Decoiler reels (16" or 20")

$380

EXA

Expandable Arbor Decoiler Reel

16" to 20" diameter

$820

CRTP

Panel Machine Crate

$695