New Tech revolutionizes the gutter machine industry with the Mach II gutter machineÉthe most versatile to hit the market in 20 years!

---

• Push button and related controls make material feed and length control safe, easy and precise. No other seamless gutter machine on the market offers this unique feature as standard equipment.
• SEPARATE POLYURETHANE DRIVE ROLLER SYSTEM drives all materials up to 24 ga. steel through the machine with ease. The polyurethane drive rollers are guaranteed for life against separation from the drive hubs, under normal operating conditions.
• STAINLESS STEEL FREE FLOATING forming rollers eliminate the excessive pressure of driven forming rollers of yesterday. This allows a much wider variety of materials to be run through the machine with little or no adjustments, making the Mach II the most advanced and versatile machine on the market.
• Guillotine style shear with DOUBLE RACK AND PINION and HARDENED TOOL STEEL CUTTING DIES ensure long life and easy cutting of all materials up to 24 ga. steel.
• Transporting the new, high tech, Mach II machine saves coil materials when compared to yesterdays outmoded gutter rollformers. Material need not be loaded and left in the machine to prevent damage and misalignment when moving from job to job, which means less wasted material and more profitÉas much as $1000/yr. based on only one move per day.

Run out stands

Ground Fault interrupter plug

Extra Reels

50 Hz. wiring

220 volt wiring

Cradles

Transfer racks

Back flange

• Free floating stainless steel forming rollers
• Mechanically advantaged guillotine shear utilizing double rack and pinion
• Driven Polyurethane rollers powered by chains and sprockets
• Fuse protected electrical controls with both entry end and exit end start/stop push buttons, jog/run and forward/reverse switches with exit end 15 amp., 120v. weatherproof double outlet auxiliary power source and power interruption wiring.
• Two independently mounted easily reversible reel stands, with two adjustable width reels.
• Limited three parts warranty
• GM 5" fits into the back of an 8 ft. pick-up
• Runs aluminum, copper, painted or galvanized steel and ternecoat standard steel

  ---

  Common specifications for All Models

  HEIGHT: 46 3/16" to top of reel

  POWER: 1 HP., 110V., 13.6 amp.

  DRIVE: Dedicated power polyurethane drive rollers

  SPEED: Approximately 45 feet per minute

  CONTROLS: Push button entry and exit end controls with jog feature and power interruption safety wiring

  FORMING: Factory set free floating stainless steel forming rollers

  FRAME: Welded tubular steel frame

  ---

Sold to..............._____________________________________

._____________________________________

_____________________________________

_____________________________________

_____________________________________

Ship to..............._____________________________________

._____________________________________

_____________________________________

_____________________________________

_____________________________________

TRN 5 _____ turnstile reel stand

RAC _____ transfer rack for turnstile reel holder

_____ Left hand shear

RL15_____ 15" ID adjustable width reel

CR5-5/6 _____ 5" or 6"cradle

___________________

_____ Left hand controls

SH5 _____ 5" geared shear

SH6 _____ 6" geared shear

ROS1 _____ single run out stand

ROS3 _____ set of 3 run out stands

GFI _____ GFI plug

220V_____ 220 volt, 50 cycle single phase wiring

12V _____ 12 Volt system

HK5 or 6 _____ 5" or 6" hook

___________________

HK56 _____ 5"/6" combo hook

BF1 _____ back flange for 1" back flange

_____ 5" crate

_____ 6" crate

Total Optional Items

TOTAL PRICE

Customer Signature _____________________________

Date _____________