CHINESE Seamless Gutter Downspout & Elbow HVAC Roof Panel Slitters & Brakes About Us
Spiral Machinery

Liberty Spiral Tube Forming Equipment


LST59

LST59 Spiral Tubeformer

Features:

- Special dies for various tube diameters,
-Very easy to change and adjust, without a crane.
- Large diameter range.
- CNC control, convenient operation
- Light and small, suitable for site work.

Three LST59 models:

LST59 - Our most economical model with automatic saw cutoff
LST59C - Will roll up to 2.0mm thick coil (14 ga)
LST59-S - Cuts material with automatic rolling shear

LST59C

LST59C Spiral Tubeformer

Features:

- All features of the LST59
- This model has extra rollforming rollers and ability to roll tubes up to 2.0mm thick


LST59S

LST59S Spiral Tubeformer

Features:

- All features of the LST59
- This model has an automatic rolling slitter shear for quiet cuts with no burrs


LSM1602

LSM1602 Spiral Tubeformer

Features:

- Uses different aluminum forming heads for diameters
- Has hydraulic rolling slitter shear for quite, smooth automatic cutoff
- Automatic discharge run out table
- Diameter size: 3.15in - 63in (80mm-1600mm)
- Speed: up to 195 ft/min (60 m/min)
- Strip Thickness:
Galvanized Steel: 0.4 mm - 1.2 mm (28 ga - 18 ga)
Stainless Steel: 0.4 mm - 0.8 mm (28 ga - 22 ga)
Aluminum: 0.4 mm - 1.2 mm (.016 in. - .047 in.)


LSM2020

LSM2020 Spiral Tubeformer

Features:

- Uses different aluminum forming heads for diameters
- Has hydraulic rolling slitter shear for quite, smooth automatic cutoff
- Automatic discharge run out table
- Diameter size: 80 - 2500mm ( 3.15 in. - 98 in.)
- Speed: up to 230 ft/min (70 m/min)
- Strip Thickness:
Galvanized Steel: 0.4 - 2.0mm (28ga - 14 ga)
Stainless Steel: 0.4mm - 1.3mm (28ga - 18 ga)
Aluminum: 0.4 - 2.0mm (.016 in. - .078 in.)


LSM3000

LSM3000 Spiral Tubeformer

Features:

- Uses different aluminum forming heads for diameters
- Has hydraulic rolling slitter shear for quite, smooth automatic cutoff
- Automatic discharge run out table
- Diameter size: 80 - 2500mm ( 3.15 in. - 98 in.)
- Speed: up to 124 ft/min (38 m/min)
- Strip Thickness:
Galvanized Steel: 0.4 mm - 1.2 mm (28 ga - 18 ga)
Stainless Steel: 0.4 mm - 0.8 mm (28 ga - 22 ga)
Aluminum: 0.4 mm - 1.2 mm (.016 in. - .047 in.)


Hydraulic Gore-Lock Elbow Machine

LHE Hydraulic Gore-Lock Elbow Machine

Elbow Diameter: 6 in.- 54 in. (150 - 1400mm)
Material Thickness: 26 - 18 ga, 0.19” - .048”, (0.5mm to 1.2mm)
Hydraulic station:
Motor: 5.5kw, 3-phase
Controls: includes leg control for free hand operation.
Speed: adjustable from 1 - 200r/per minute

View video of our different spiral machines here.