SSR MULTIPRO JR.TM Residential/Light Commercial U.S. Patent No. 6,772,616 The first truly economical solution to metal roofing.
VERSATILE. . . INNOVATIVE. . . DEPENDABLE. . . PROFITABLE The state-of-the-art SSR MultiPro Jr.TM Panel Machine runs up to 6 panel
profiles in variable widths, multiple gauges and various material types.
STANDARD FEATURES
Separate Polyurethane Drive Rollers
Hardened Stainless Steel Forming Roller System
with Shear Dies
EZE CHANGETM Profile Replacement System
Waterproof NEMA 4 Electrical System
Power Interruption Safety Circuit
Forward Pulling, Easy Cut Shear
UL 90 Rated Panels
Push Button RUN/JOG Controls at Entry and
Exit Ends
100 Foot, 10 Ga., 20 Amp Extension Cord
Length Control Limit Switch
Two Sets of Bead, Pencil, or V Rib Rollers
Electric Motor
Welded Tubular Steel Frame
SPECIFICATIONS
SSR Panel Machine Length 12' 10" (3.9m)
Width 3' 10" (1.2m)
Height 4' 3" (1.3m) w/ Over Head Rack
1' 10" (.6m) w/o Over Head Rack
Weight 2200 lbs. (1000kg)
SSR On Trailer Length 17' 6" (5.3m)
Width 7' (2.1m)
Height 6' 3" (1.9m) with reel
Weight 3800 lbs. (1700kg)
Speed 30 ft/min (9m/min) Approx.
Drive Polyurethane Rollers
Shear Manually Powered, Infinitely Adjustable,
Hardened Tool Steel Blades and Dies
Coil Width 15" to 20" (380mm to 500mm)
Materials Formed Steel 30 ga. to 24 ga. (.3mm to .6mm)
(painted, galvanized, aluminized)
Aluminum .019" to .040" (.5mm to 1.0mm)
Copper 16 oz. to 20 oz. 3/4 Hard
(.5mm to .7mm)
OPTIONS - SSR MULTIPRO JR.TM
ROS-10
Run Out Table
Table attaches to shear and is used to support panel as it exits the machine. Adjustable leg allows variation in height from 25” to 43”. Available in connectable 10 ft. sections.
EZE CHANGE?
ROLLER
SYSTEM
Forming stations mounted on aluminum rails used to form various panel profiles. Includes shear dies.
DR01-EX
Expandable Arbor
Used for holding coil. This arbor expands to the inside diameter of the coil for faster, easier loading. Can accommodate coils with 16” to 20” ID. Capacity is 3,000 lbs. when used with Dual Overhead Reel Stand or Single Free Standing De-Coiler.
DR01-16
OR 20
De-Coiler Reel
Two-piece reel with a fixed diameter used for holding coils. Available for 16” or 20” ID. Capacity 3,000 lbs. when used with Dual Overhead Reel Stand or Single Free Standing De-Coiler.
TR12
Trailer
NATM Compliant, 12,000 lb. tandem axle trailer used for towing any NTM roofing machine directly to the jobsite. Equipped with crane lifting eyes, 4 drop-foot jack stands and electric brakes w/ breakaway kit.
DR2M
Dual Overhead Reel Stand
Machine mount overhead stand for holding up to two Expandable Arbors with coil or two De-coiler Reels with coil for a combined total capacity of 6,000 lbs.
FSD1
Single Free Standing De-Coiler
A Remote stand used at the entry end of the machine to hold one Expandable Arbor with coil or one De-Coiler Reel with coil. Total capacity 3,000 lbs.
Shown with optional DR01-EX
CR
Clip Relief Rollers
Used to help hide screws and bases of clips by forming an offset down both corners of the panel.
HS-1
Hand Seamer
Hand held device used to single-lock mechanically seamed panels.
RR1
thru
RR6
Pencil, Bead, V and Straition Rollers
A variety of ribs used to aesthetically enhance standing seam panels.
RRF
Frame Assembly
Used to mount additional rib or striation rollers making changeovers fast and simple.
Profile and Machine
Comparison
Select X mark to
connect to .PDF drawing for each panel Requires that Adobe Reader be installed
